Amorphous Alloy Core Transformers, Oil Immersed Distribution Transformer, 3p High Voltage Power Transformers
S10 Series 33kv class distribution transformer is one the impoertant equipment in power supply and distribution system of industrial and mining enterprises and cicil buildings. It reduces 33kv network voltage to 230/400v bus voltage used by users.This kind of product is suitable for AC 50/60 hz, three phase maximum rated capacity 2500kva.and can be used indoors (outside)
Features
1.Meet or exceeds ANSI.IEC.GB.SANS.Standards
2.Safe handing,installationand operation.
3.Attractive,modern appearance
4.Reasonable structure
5.Fully-sealed
6.Higher syetem reliabitity
7.High security and reliability in operation
8.High capacity of overload and efficiency
9.Robust construction having excellent short circuit and thermal withstand capabilities
10.EVERPOWER tranformers are more efficient by reduced no-load losses and reduced load lossed.
| KVA | Voltage | VECTOR GROUP | LOSSES | No-Load Current | Weight(kg) | Overall dimension (mm) |
| H.V(KV) | L.V(KV) | No-Load Loss | Load Loss | | Oil Weight | Total Weight | L | W | H |
| 20 |
6
6.3
10
10.5
11
13.2 |
380
400
415
433 |
YynO Dyn11 Yzn11 | 90 | 530 | 2.3 | 55 | 230 | 720 | 440 | 855 |
| 30 | 100 | 600 | 2.1 | 75 | 305 | 750 | 500 | 990 |
| 50 | 130 | 870 | 2.0 | 80 | 405 | 800 | 480 | 1030 |
| 63 | 150 | 1040 | 1.9 | 95 | 455 | 830 | 615 | 1060 |
| 80 | 180 | 1250 | 1.9 | 105 | 510 | 840 | 580 | 1115 |
| 100 | 200 | 1500 | 1.8 | 120 | 530 | 890 | 645 | 1145 |
| 125 | 240 | 1800 | 1.7 | 130 | 670 | 910 | 600 | 1185 |
| 160 | 280 | 2200 | 1.6 | 140 | 810 | 910 | 700 | 1280 |
| 200 | 340 | 2600 | 1.5 | 160 | 890 | 1000 | 760 | 1240 |
| 250 | 400 | 3050 | 1.4 | 175 | 1020 | 1285 | 730 | 1290 |
| 315 | 480 | 3650 | 1.4 | 185 | 1170 | 1280 | 740 | 1385 |
| 400 | 570 | 4300 | 1.3 | 215 | 1410 | 1310 | 750 | 1432 |
| 500 | 680 | 5100 | 1.2 | 260 | 1645 | 1365 | 765 | 1510 |
| 630 | 810 | 6200 | 1.1 | 310 | 2070 | 1485 | 815 | 1615 |
| 800 | 980 | 7500 | 1.0 | 370 | 2445 | 1640 | 930 | 1590 |
| 1000 | 1150 | 10300 | 1.0 | 425 | 2800 | 1860 | 1120 | 1630 |
| 1250 | 1360 | 12000 | 0.9 | 480 | 3320 | 1860 | 1120 | 1830 |
| 1600 | 1640 | 14500 | 0.8 | 550 | 4175 | 1975 | 1175 | 1900
|
Typical test values and performances are performed in the painting lab on steel plates during the whole painting process in order to confirm the following:
• Minimum paint thickness film (ISO 2808): 70µm
• Specular gloss factor at 60 Deg (ISO 2813): 90 +/- 5%
• Falling weight test (ISO 6272): 1Kg/050cm
• Erichsen cupping test (ISO 1520): 08mm
• Scratch test (Adhesion ISO 2409): 0
• Bend Test (cylindrical mandrel ISO 1519): 3,0mm
• Salt spray (Fog) test (ISO 7253): Over 1000 Hours
